Siding installation is a delicate process. The proper placement is critical. Even the slightest mistake in siding installation will result in a complete failure. Professional siding installers know how to install the siding properly. The most common mistake that DIYers make is applying the siding too loosely and cutting it too close to the walls. They will also know to ensure that the siding is properly secured. Regardless of whether you opt to replace the old siding or install the new one, make sure that the process is as painless as possible.
Before you begin siding installation, you should make sure that the walls are properly sheathed. Make sure that the top row of the siding is about 1/2 inch shorter than the vertical trim pieces. Measure the distance between these vertical trim pieces from the inside surface of the channels. Then install the first piece of siding, making sure that the bottom lip hooks over the starter strip. Nail siding to the wall in 16-inch intervals. Once the siding is installed, make sure that the trim pieces are level.
Installing vinyl siding is fairly simple. Install the strips in layers, leaving a gap of 1/8″ in the bottom row for the nailed seams. Make sure to mark the nails properly, and use pop rivets to secure them to the siding. Do not force them up too tightly or drive them against the siding nail hem. This can cause the siding to buckle with temperature changes. Also, make sure that the fasteners are placed correctly, with the heads of the nails flush with the vinyl siding.
Trimming around windows and doors is an essential part of a new siding installation. If the trim is overlapping, use the same piece of vinyl. If you don’t want to cut the siding, consider using existing trim. Then, you can reuse it with the new siding. You can also use existing trims around the window to add a stylish touch to the house. It can be tricky to remove a faucet from the wall, but there are a few tricks to get the faucet to fit snugly.
When installing vinyl siding, consider whether to add insulation to the walls or not. Rigid foam board insulation costs about $5 per square foot. Insulated vinyl siding costs about $8 per square foot and increases the home’s R-value. This will keep the house warmer in the winter and cooler during the summer. If you install insulated siding, you should also consider the cost of installing insulated windows and doors, as they can add to the overall cost.
Once the house wrap is installed, you should inspect the walls for any damage. Make sure to address any damage, such as water rot, sheathing damages, and asbestos. If any of these areas are damaged, you will need to hire a professional to repair them. If you find any of these areas to be damaged, the new siding will not secure the walls against them. It will also take you time and money to do this task. You should also consider the style of siding you want for your house.
Before deciding on the type of material for your home’s exterior, be sure to choose a reputable contractor. Sidings can be made from wood, stucco, brick, and aluminum. Fiber cement siding is the most common siding material. It is a combination of wood fibers and Portland cement. It can be easily cut into boards with varying textures and colors. The most important factor to consider is the strength and durability of the siding.
After determining which type of siding is the right choice for your home, determine a starting strip height. This will help you keep the first row of siding level and ensure that you cover the bottom of the walls with the proper siding. Next, install a 1/2-inch-thick foam sheathing over each corner and nail on the corner trim over it. It’s important to follow these steps for the best siding installation results.
Then, prepare the walls for installation. If you’re replacing the exterior of your home, consider installing vinyl siding. It is an inexpensive and durable option that will protect your investment and look great for years to come. Choose experienced installers to get a professional finish. There are several things to remember when hiring a siding contractor. Just make sure that you read the installation manual for your siding before you hire anyone. There are many steps and guidelines to follow during siding installation, so make sure that you understand the process and follow them to the letter.